Home
About Us
Home > News > The machining of iron parts in CNC machining parts center is good or bad
The machining of iron parts in CNC machining parts center is good or bad
2018-11-05
The machining of iron parts in Cnc Machining Parts Today we answer this question and analyze the specific hard track. Before using the track, first as a CNC machining center manufacturer, you must ask what the iron parts the customer wants to process, how big the size is, whether it is finishing or roughing, etc. If you don't understand these details, even As a professional manufacturer of CNC machining centers, it is not good to give an accurate answer. Generally speaking, the iron parts that we often say are relatively large workpieces. Of course, we do not rule out special cases. Then we will use larger iron parts.
The large-sized iron parts are of high quality, and the cutting amount is generally large. In this case, the hard rail is most suitable, the hard rail has good rigidity, strong earthquake resistance and strong bearing capacity, and is suitable for heavy-duty cutting. If you use a linear NC machining center, it is not very good, and even damages the guide rail. The rail is likely to be deformed due to the inability to withstand heavy-duty cutting. Therefore, when customers have special requirements, our CNC machining center manufacturers generally recommend customers to use hard-track CNC machining centers, and the same type of CNC machining center hard rails are cheaper than the line rails, and the CNC machining centers with large strokes are like The 850 and so on are all optional without line rails But, our factory can process any iron parts , if you have interested , can contact me.
Share to:
